Howtos / Articles

Logo URL for Cisco 7940/7960 on Trixbox

The Cisco 7940 and 7960 VOIP phones (possibly other models too) allow you to send a image file to the phone for it to display as the main logo while the phone is idle. Trixbox comes with a image file you can use by default, however it doesn’t automatically set up Cisco phones to use it. The url you need to use for the Logo URL is as follows: http://<ip of trixbox server>/cisco/bmp/asterisk-tux.bmp Note: Replace “<ip of trixbox server>” with…

Read more [...]

Installing HAProxy on CentOS 6

This guide will step you through the process of installing HAProxy on CentOS 6. To install HAProxy on CentOS 6 you first need to set up your installation to use the epel software repository. HAProxy is not available in the default CentOS repositories. (Note: All commands below require root privileges.) rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-7.noarch.rpm You can now install haproxy. yum -y install haproxy Now that HAProxy is installed, you can configure the haproxy.cfg file. vi /etc/haproxy/haproxy.cfg Once you have configured HAProxy,…

Read more [...]

Monitoring Compaq or HP Smart Array RAID status on CentOS

This howto will step you through the process of setting up the required software to be able to check the status of a Compaq or HP Smart Array and the attached physical and logical drives on CentOS 6 or RHEL. The required program to be able to talk to the Smart Array is called ‘hpacucli’, which can be found in the ‘HP Service Pack for ProLiant’ package. (Note: Some of the commands below require root privileges.) Obtaining and Installing the…

Read more [...]

Installing lspci on CentOS

The lspci command, which can be found in the pciutils package, is a great tool for finding information on the devices in your PC. the lspci command will allow you to get the model number/chip details for devices such as network interface cards, sound cards, raid cards, etc. To install pciutils on CentOS/RHEL using yum: (make sure you are logged in with root privileges) # yum install pciutils Example installation output: # yum install pciutils Loaded plugins: fastestmirror, presto Loading…

Read more [...]

First thing to do after creating a virtual server

If you are setting up a new virtual server (eg. on Rackspace / any VPS provider), the first thing you will want to do after creating the server, is to check the IP address you are assigned against known blacklists. If you find that your new IP address is on one of these lists, rather than try and remove the IP from the blacklists, it might be quicker to create a new virtual server (which will assign a new IP…

Read more [...]



Page 22 of 38« First...10...18192021222324252627...Last »